HTL68
來源： 日期：2013/5/29 15:38:16 人氣：30 標簽：
| 規格 | SPECIFICATION | | HTL68 |
| | | | A | B | C |
| 注射裝置 | INJECTION UNIT | | | | |
| 螺桿直徑 | Screw diameter | mm | 26 | 30 | 32 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 25.4 | 22 | 20.6 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 67.6 | 90 | 102 |
| 注射重量 | Injiection weight(ps) | g | 61.4 | 82 | 93 |
| 注射速率 | Injection rate | g/s | 55 | 73 | 83 |
| 注射壓力 | Injection pressure | Mpa | 250 | 188 | 165 |
| 螺桿轉速 | Screw pressure | rpm | 195 |
| 鎖模裝置 | CLANPING UNIT | | |
| 鎖模力 | Clamping force | kN | 680 |
| 移模行程 | Open stroke | mm | 280 |
| 拉桿間距(寬*高) | Space between tie bars(W×H) | mm | 310×310 |
| 最大模厚 | Max.Mold height | mm | 320 |
| 最小模厚 | Min.Mold height | mm | 100 |
| 頂出行程 | Ejector stroke | mm | 80 |
| 頂出力 | Ejector force | kN | 28 |
| 其他 | OTHERS | | |
| 最大油泵壓力 | Max.Pump pressure | MPa | 16 |
| 電機功率 | Pump motor power | kW | 7.5 |
| 電熱功率 | Heating power | kW | 6.8 |
| 外形尺寸（長*寬*高） | Machine dimension(L×W×H) | m | 3.65×1.16×1.73 |
| 油箱容積 | Oiltank cubage | L | 150 |
| 機器重量 | Machine weight | t | 2.5 |
| | | | | | |
模板正面尺寸 PLATEN DIMENSIONS
|  |
模板側面尺寸 MOULD SPACE DIMENSOINS
|  |
